Eurowise 3.2 VR6 R32 Mk1 Conversion Kit

Hand built in house at Eurowise in the USA! Virtually a drop in a even more powerfull 24v VR6 engine conversion from an R32, Passat, and even Touareg drivetrain! Every kit is built from mild steel and tig welded for strength and longevity. Our VR6 conversions do not require any cutting or welding to install. Several stages available depending on power levels and vehicle usage. Now you can swap a VR6 in your Rabbit show car without hacking, grinding, and welding on your freshly painted engine bay! Our conversions make the process completely reversible if wanted.

Our axles are built in the USA and are supplied by renowned axle builders “The driveshaft shop” No expenses spared there. We have a 1 year warranty on our axles and unlimited customer support on repairs and rebuilds.

Chassis Fitment applications

  • Scirocco Mk1 / Left and right hand drive (1974-1982)
  • Scirocco Mk2 / Left and right hand drive (1982-1992)
  • Golf Rabbit Caddy Jetta Mk1/ Left and right hand drive (1974-1984)
  • Golf Cabriolet Mk1/ Left and right hand drive (1974-1992)

Engine fitment applications

  • OBD2 24 valve R32 VR6
  • OBD2 24 valve 3.6 VR6 (rear engine mounts vary., must send photo of rear engine mounting )

Stage 1 Kit Contents

  • X1 Front Engine Mount w/Hardware & Bushing
  • X1 Rear Engine Mount w/Hardware & Bushing
  • X1 Upper Transmission Mount w/Hardware & Bushing
  • X1 Lower Transmission 4th Mount w/Hardware & Bushing
  • X1 Front Engine Mount Spacer w/Hardware
  • X1 Custom Performance Axles w/Hardware

(note this mount kit  requires the use of 02A 5 speed and 02j 5 speed VR6 transmissions only. ) 

** If your MK1 is older than 81 you may require 2 shims to prevent axle rubbing inside spindle housing. Shim will be placed between outer CV joint and inner wheel bearing **

 

EUROWISE - R32 CONVERSION KIT - 8X14 300DPI