Eurowise Coolant tank mounting and hose routing  

  RSS

eurowise
(@eurowise)
Member Admin
Joined: 3 years ago
Posts: 47
05/02/2020 3:55 pm  

We will try to continuously update this thread as there's many ways to route the hoses. We will show you the way we do ours. If you don't see your version listed here please don't hesitate to email us. info@eurowise.com

 

AAA

- On AAA non heat models use the supplied 90 degree hose and route the upper pipe back into the top of the cylinder head nipple.

- On AAA models with head route the upper tank hose to the heater core hose and route the opposite heater core hose to the back of the VR6 cylinder head nipple.

Routing for ( With heat models can be seen here )

[IMG] [/IMG]

24 valve VR6

AFP

[IMG] [/IMG]

- On AFP models with head route the upper tank hose to the heater core hose and route the opposite heater core hose to the back of the VR6 cylinder head nipple.

Routing for ( With heat models can be seen here )

[IMG] [/IMG]

 

On AFP non heat models use the supplied 90 degree hose and route the upper pipe back into the top of the cylinder head nipple.

24 valve VR6

3.6 VR6

Opposite end of the longer hose routes to the smaller hose on the thermostat housing under the intake manifold

Routing for ( With heat models can be seen here )

[IMG] [/IMG]

[IMG] [/IMG]

[IMG] [/IMG]

This topic was modified 9 months ago 5 times by eurowise

Quote
Share: